ELIMINADOR/CONVERTIDOR DE VOLTAJE , IDEAL PARA TIRAS DE LED,CCTV, BOMBAS SURTIDORAS DE AGUA, ARDUINO, ETC... ENTRADA 120Vac, SALIDA 12Volts, 2.5Amperes. CONECTOR DE SALIDA 2.1mm "CILINDRO INVERTIDO". MARCA HUAWEI o SIMILAR.
this is a simple RS232 to RS485 converter that is self powered using the TX, RX or RTS, CTS signals for power. The RS232 is DB9 female connector, and the RS422 side is a DB9 male or 4 position terminal block
Baud rate:300-9216000bps automatic detection of serial signal speed.
Interface form:USB type A interface, male head, DB9 male connector connector
Direction control:Using data flow automatic control technology, automatic discrimination and control of
data transmission direction.
The signal indicates that the red light is the power supply, the green light is the
sending signal, and the yellow light is the receiving signal.
-Baud rate automatic detection and zero delay automatic transmission, so you can get high-speed data transmission through the RS-485 or RS-422 interface.
-Effectively protect your expensive and sensitive control equipment against electrical damage,600W static surges, and + 15kV electrostatic protection.
-FTDI Chip supports the widest possible OS compatibility: Windows,Linux and for Mac.
-The shielded cable supports four wires full duplex, two wires half duplex; point to point, point to multi-point communication
4 Kinds of Working Modes: Asynchronous
Point to point / four wires full duplex;
Point to multiple point / four wires full duplex;
Point to point / two wires half duplex;
Point to multiple point / two wires half duplex.
1 x USB to Serial Converter Cord
1 x RS422 RS485 Serial DB9 to Terminal Block Adapter
QUIERES QUE TU LAPTOP/PC TENGA UN PUERTO SERIAL (YA DESCONTINUADO EN LAS NUEVAS COMPUTADORAS)?, UTILIZA ESTE CABLE PARA CONECTAR CUALQUIER APARATO SERIAL A UNA LAPTOP O PC. FUNCIONA SIN NINGUN PROBLEMA CON WIN XP, PARA WIN7, etc... HAY QUE INSTALAR EL DRIVER QUE TE PASO MAS ABAJO.... CON WIN10 NO LO HE PROBADO, PROBABLEMENTE FUNCIONE EL MISMO DRIVER... O CHEKATE EN WWW.FTDI.COM, ACTUALIZAR EL DRIVER
Uses CP2102 chip; produces analog serial port after drive installed; powered via USB : 3.3V(<40mA), 5V, GND, TX, RX, signal lead pin level: 3.3V positive logic; with LED indicator: the higher Baud rate, the brighter the light; supports 300bps~1Mbps Baud rate; communication format: 5,6,7,8 data, 1,1.5,2 stop, odd,even,mark,space,none test; system: windows vista/xp/server 2003/200,Mac OS-X/OS-9,Linux; USB male port can directly connect to PC; high quality SMT SMD.
The ITR8102(Slot Optical Switch) is a gallium arsenide infrared emitting diode which is coupled with a silicon photo transistor in a plastic housing. The packaging system is designed to optimizes
the mechanical resolution, coupling efficiency, and insulates ambient light. The slot in the housing a provides a means of interrupting the signal with printer, scanner, copier, or other
opaque material, switching the output from an ” ON” to” OFF” state.