PANTALLA LCD 7

$1,050.00

BUS DE CABLES PARA RASPBERRY-PI

$150.00
NUEVO MODELO!!! AHORA VIENEN CON ACCESORIOS DE MONTAJE (ANTES ERAN SOLO LOS CABLES) BUS DE CABLE PLANO (26 LINEAS) Y BUS DE 8 LINEAS DE COLORES PARA MICROCONTROLADOR RASPBERRY, 30cm DE LARGO, ESTANDARIZADO

CONVERTIDOR DE NIVELES LÓGICOS 2CH

$23.00
2 channels of high-voltage logic and low-voltage logic bilateral switching Size: 15.5mm x 16mm x 11.5mm Module is compatible with the breadboard, it can be put on the breadboard directly Description: High Voltage: 5V Low Voltage: 3.3V GND for negative power 5V TTL RXI input, 3.3V TTL RXO output TXI input/output of 3.3 V TTL, TXO input/output 5 V TTL, TXI and TXO bilateral switching

CONVERTIDOR DE NIVELES LÓGICOS 4CH

$53.00
INTERFAZ ENTRE MICROCONTROLADORES CON SALIDA A 3.3V PARA TRANSFERIR A 5V. ideal para raspberry pi!!!. TAMBIEN MANEJAMOS UNO MAS SENCILLO DE 2 CANALES

CONVERTIDOR DE NIVELES LÓGICOS 8CH

$35.00
Convertidor niveles logicos bidireccional 8CH. Basado en el integrado TXS0108E de Texas Instruments permite comunicación bidireccional entre sistemas que trabajan a diferentes voltajes en el rango de 1.8v a 5v. Permite conectar sistemas que trabajen a 3.3v a sistemas de 5v. Features: •8-bit bidirectional conversion •Data transfer rate: 60 Mbps •Port A: 1.2V - 3.6V •Port B: 1.65V - 5.5V •Port A (VCCA) should not exceed Port B •Connecting OE with VCCA will connect between the ports.

DISIPADOR DE CALOR PARA RASPBERRY PZA

$15.00
DISIPADOR DE CALOR PARA RASPBERRY. OJO!!! ES SOLO 1 PIEZA. TAMBIEN MANEJAMOS KIT DE 3 PZAS.

GABINETE CON VENTILADOR para RASPBERRY PI

$320.00
PROTEJE TU RASPBERRY!!! GABINETE PARA TARJETA RASPBERRY PI-3, TIENE TODOS LOS ORIFICIOS PARA TODOS LOS CONECTORES. ÚNICAMENTE PARA MODELO PI-3. (Incluye ventilador y gomas de sujecion -patitas-).

PANTALLA LCD 7

$1,050.00
PANTALLA LCD 7" TOUCH, PARA RASPBERRY-PI3, B Y B+ O ARDUINO. 1024X600. OJO!!! NO ES TOUCHSCREEN. CARACTERISTICAS: Operating voltage: 5V (current requirement 1A-2A), for example car power need to add a 5V regulator Rated power: 6-7W Signal input: 2 AV + VGA + HDMI (HDMI 1.2) Support 5V DC voltage input, you can use USB, or power bank, but the positive and negative can not be reversed, to avoid damage the circuit board Resolution: 1024 * 600, Plug and Play: Support OSD language: Simplified Chinese, Traditional Chinese, English, Japanese, Korean, Spanish, French, German, Italian, Portuguese Control: Multi-function OSD operation or potentiometer adjust the brightness and color Features: Using mature program, clear display Support image flip up and down, the image can conversion 4: 3 / 16: 9 display format

RASPBERRY PI 3 Bluetooth WiFi

$1,400.00
NUEVO MODELO!!! AHORA CON, BLUETOOTH, WiFi, 4 USB´y 1GB de RAM!!! COMPATIBLE CON WINDOWS 10 The Raspberry Pi has a Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor (The firmware includes a number of "Turbo" modes so that the user can attempt overclocking, up to 1 GHz, without affecting the warranty), VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded to 512 MB, NOW WITH 1GB of RAM!!!. It does not include a built-in hard disk or solid-state drive, but uses an SD card for booting and long-term storage.RJ45 RED, SE CONECTA A MONITORES HDMI . SISTEMA OPERATIVO LINUX y WINDOWS !

RASPBERRY PI WEBCAM

$700.00
CAMARA 100% COMPATIBLE CON RASPBERRY-PI, PUERTO DEDICADO, SIN PROBLEMAS DE COMPATIBILIDAD Y/O DRIVERS, NO OCUPA PUERTO USB. IDEAL PARA PROYECTOS RECONOCIMIENTO DE IMAGEN, VISION POR COMPUTADORA, ROBOTICA, ETC...

RASPBERY SHIELD EXPANSION

$185.00
PLACA PARA RASPBERY, SHIELD EXPANSION DE PUERTOS EN CASCADA

WiFi modulo para RASPBERRY-PI

$423.00
WiFi modulo para RASPBERRY-PI, compatible con modelo B y B+, tipo "DONGLE" USB