RUEDA LOCA JAPONESA METALICA
$52.00
This ball caster kit includes a black ABS housing, a 1/2" diameter metal ball, two spacers (1/16" and 1/8" thick), and two #2 screw sets. The total height of the ball caster, 0.53", can be increased to about 0.7" using the included spacers. The two included #2 screws can be used to mount the ball caster to your chassis (the distance between the screw holes is 0.58").
Note that our ball casters are designed for small robots; they are not intended to bear more than a few pounds. With more weight than this, friction between the ball and the housing will probably keep it from rolling well.
74LS48 74HC48 DESCONTINUADO!!! SUSTITUTO 74HC47
74LS48 DECODER 7 SEGMENTOS CATODO COMUN, PARA DISPLAY DC05 O SIMILAR, COMPATIBLE CON 74HC48, 7448, SN74LS48, ETC...PRODUCTO DESCONTINUADO!!!! DESDE EL 2012...YA NO SE CONSIGUE EN NINGÚN PROVEEDOR
FSCQ1565RT FLYBACK
$106.00
A Quasi-Resonant Converter (QRC) typically shows lower EMI and higher power conversion efficiency compared to a conventional hard-switched converter with a fixed switching frequency. Therefore, a QRC is well suited for noise-sensitive applications, such as color TV and audio.
74HC73 PIEZA DESCONTINUADA(Se recomienda 74HC/LS112)
$37.00
CIRCUITO TTL, FlipFlop JK DISPARO NEGATIVO, OJO PIEZA DESCONTINUADA...ULTIMAS PIEZAS.
ATMEGA328P CON BOOTLOADER. OJO!!! PRODUCTO ESCASEANDO SUBIDA DE PRECIOS!!
$167.00
CIRCUITO REEMPLAZO ORIGINAL DEL MICROCONTROLADOR QUE VIENE EN EL ARDUINO ONE. YA VIENE "PRECARGADO" CON BOOTLOADER (SIST. OPERATIVO), USALO DE REEMPLAZO PARA TU PLACA ARDUINO DAÑADA. CONECTALO Y LISTO PARA USAR!!!, TAMBIEN MANEJAMOS ESTE CIRCUITO SIN BOOTLOADER, MAS ECONOMICO.
MOTORREDUCTOR 1:48 LINEAL 1 EJE. DESCONTINUADO!!!!
$70.00
DESCONTINUADO!!!! (AHORA LLEGA CON DOS EJES!)
MOTORREDUCTOR PLÁSTICO, relación 1:48, aprox. 1.2Kg torque, alimentación 5V/200mA, ideal para robots seg. de lineas o cochecitos en general, se considera un motor "rápido".
74LS74 74HC74
$18.00
One main use of a D flip-flop is as a Frequency Divider. If the Q output on a D-type flip-flop is connected directly to the D input giving the device closed loop "feedback", successive clock pulses will make the bistable "toggle" once every two clock cycles.