2SD1071 TRANSISTOR NPN 450V 6A

CAPACITOR 47uF 50V, ELECTROLITICO

AP4310AM CIRCUITO FUENTES

CAPACITOR 150uF 400V ELECTROLITICO CONTAMOS CON DIFERENTES VALORES Y MODELOS

FAN7530 . FACTOR ENERGETICO

LA4440 AMPLIF. AUDIO 6W ESTEREO

LMT-5050-RGB3-7815P

RU6099R MOSFET CANAL-N 60V 120A

SPP21N50C3 MOSFET CANAL-N 560V 21A

STRX6757 POWER SUPPLY

PRODUCTO DESCONTINUADO!!! TE RECOMENDAMOS EL UT-139, EN LUGAR DE ESTE... MULTIMETRO PROFESIONAL, CONEXION USB, CAPACITOMETRO, VOLTS Y CORRIENTE ALTERNA Y DIRECTA, FRECUENCIMETRO, PANTALLA CON LUZ, TERMOMETRO. CHECA MANUAL EN LOS LINKS...

CONTACTO SENCILLO 120Volts/250Volts, FUSIBLE A ADAPTARSE SEGUN TUS NECESIDADES (TAMBIEN MANEJAMOS CON SWITCH).

CAPACITOR 68uF 35V, ELECTROLÍTICO. TAMBIÉN LO MANEJAMOS EN OTROS VOLTAJES.

CABLE BANANA-GANCHO 0.8Mtr

LIMIT SWITCH VASTAGO LARGO. This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch, but the long lever arm makes it especially useful as a tactile bump sensor for your robot (e.g whiskers or antennae). The switch body dimension is 20.0 x 6.4 x 10.2 mm, and the lever arm is 50 mm long. This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch, but the 2"-long lever arm makes it especially useful as a simple tactile obstacle-detector for your robot. The switch body dimension is 20.0 x 6.4 x 10.2 mm (0.79" x 0.25" x 0.40"), and the lever arm is 50 mm (2") long. This three-pin switch can also be used as a two-pin single-pole, single-throw (SPST) switch that is open or closed by default, depending on which two pins are used.

BASADO EN UN FOTORECEPTOR... SALIDA DIGITAL O ANALOGICA, AJUSTE DE SENSIBILIDAD. OJO!!! MARCA DFRobot (USA) CARACTERISTICAS: Wide voltage range from 3.3V to 5V, Standard assembling structure (two 3mm holes with multiple of 5cm as interval), Easily recognitive interfaces of sensors ("A" for analog and "D" for digital), Icons to simplely illustrate sensor function , High quality connector, Immersion gold surface.